Home Perler Bead Patterns Characters Side Part Kid
Side Part Kid Perler Bead Pattern
The Side Part Kid spans 30 × 34 beads — about 5.9 inches wide on the board — 613 beads across 8 colors, every one counted in the list below. Print the grid for the pegboard, or place it here in the browser and repaint any color before you commit.
613 beads 5.9 in × 6.7 in finished 8 color zones easy level
Pick a zone, pick a bead
Tap a zone (or the template itself), then pick from the 32 standard bead colors or a custom one, snapped to the bead you'd actually buy — the template above, the chip and the materials list all update together.
Make it yours, bead by bead
The board opens as the side part kid itself, every color area where it belongs. Pick a color, then click — or drag in any of the eight directions — and the brush carries it along your stroke. Turn on Mirror and every stroke lands on both halves of the board at once, so symmetric designs repaint in half the time. The eraser wipes beads back to white, Clear all empties the whole board, and the list below always counts exactly what's on it.
- Nothing painted yet — your bead list builds as you draw.
Beads you'll need
Updates live as you recolor. Counts assume single-sided ironing.
- P89 Dark Spruce ×200
- P97 Carnation Pink ×155
- P90 Cocoa ×124
- P50 Toothpaste ×85
- P26 White ×18
- P94 Brick ×14
- P100 Lemon ×11
- P15 Tomato ×6
How to make the Side Part Kid
- Print or load the template. The zone letters in the blank template match the zone list above — every bead knows which zone it belongs to.
- Pull the beads. Dark Spruce ×200, Carnation Pink ×155, Cocoa ×124, Toothpaste ×85, White ×18, Brick ×14, Lemon ×11, Tomato ×6 — that's 613 beads for the reference colors, plus a few spares if you're customizing.
- Place by zone. Work one zone at a time on a 30×34 area of your pegboard; the letters keep you oriented even if you invent your own palette.
- Iron both sides. Ironing paper over the beads, medium heat, no steam, 20–30 seconds per side, then weight it under a book while it cools.
FAQ
How many beads does the Side Part Kid pattern need?
613 beads total: Dark Spruce ×200, Carnation Pink ×155, Cocoa ×124, Toothpaste ×85, White ×18, Brick ×14, Lemon ×11, Tomato ×6 . The finished piece measures about 5.9 in wide.
Is the Side Part Kid pattern good for beginners?
Yes — it is marked easy: 8 color zones and no fiddly single-bead details beyond the standard ones. Most first-timers finish it in one sitting.
What pegboard size does the Side Part Kid use?
The grid is 30 beads wide by 34 tall — plan on two large interlocking pegboards side by side .
More characters patterns
43 designs in this collection — see all characters.
